To start working with Neutis, flash it with a Linux image. You can download the latest dev image below:
|Ubuntu Xenial image - dev release|
Do not wait for Neutis tests in Emlid Flasher, unplug your module after flashing progress bar.
Neutis Dev Kit includes a heatsink, attach it by the following way:
Learn more about Yocto in the corresponding section.
To flash Neutis you'll need to boot it in a flashing(FEL) mode.
Learn more about flashing mode in the corresponding section.
Entering flashing(FEL) mode¶
- Supply power to Neutis devboard from your PC over the USB cable
- Push the UBOOT button and hold it
- Push and release the RESET button
- Release the UBOOT button
Alternatively, you can enter flashing mode by holding the UBOOT button and powering Neutis devboard via micro-USB cable.
Use Neutis Manufacturing Flash Tool to flash Neutis.